Lumeno crystal-clear or standard glass lens in 3, 5 or 8 dioptres with 127 mm diameter
Lens-crystal clear / 3 dioptres
€22,90
Sale price
€22,90
Regular price
Skip to product information
Lumeno crystal-clear or standard glass lens in 3, 5 or 8 dioptres with 127 mm diameter
Item number:6233
€22,90
Sale price
€22,90
Regular price
Taxes included.
Shipping calculated at checkout.
Downloads & documentation:
| Data sheet | Not available |
| User manual | Not available |
Lumeno crystal-clear or standard glass lens / replacement lens 127 mm for professional use in 3, 5 or 8 dioptres
Crystal-clear genuine-glass replacement magnifier without any blue tint! It is therefore suitable for professional use.
-
Models: 6233/ 3 dioptres, 6235/ 5 dioptres and 6238/ 8 dioptres
or
Standard genuine-glass replacement magnifier.
- Models: 6133/ 3 dioptres, 6135/ 5 dioptres and 6138/ 8 dioptres
For replacing scratched lenses in work lamps or for converting to a different dioptre strength when requirements change.
- Diameter: approx. 127 mm
- 3 dioptres corresponds to a 1.75x magnification
- 5 dioptres corresponds to a 2.25x magnification
- 8 dioptres corresponds to a 3.00x magnification
Fits all common magnifier lamps with a 127 mm lens. For example the Lumeno magnifier lamps: 710X, 721X, 821X, etc.
Frequently asked questions
Does this lens fit my lamp?
Matching works via series and diameter – both are in the product title (e.g. 152 mm for the 851X series). If in doubt, measure the diameter of your old lens or send our service team the model number from the type plate – they will name the right lens for you.
Read more in our guide: How long are spare parts available for my magnifying lamp?
Does it matter which way round I insert the lens?
No – the orientation of the lens plays no role during installation; top and bottom are equivalent.
Read more in our guide: Changing the lens: when it works and when it is better not to
Can I install a different dioptre strength than before?
The springs in the articulated arm are factory-tuned to the weight of the installed lens. Swapping for the same strength is straightforward; with a heavier or lighter lens the arm can lose its balance and needs readjusting.
Read more in our guide: Changing the lens: when it works and when it is better not to
Crystal clear or standard – what is the difference?
Standard glass lenses have a minimal green tint that usually goes unnoticed while working. The crystal-clear version is colour-neutral – the right choice when you need to judge colours, for example in cosmetics, print or electronics.
Read more in our guide: Crystal-clear or standard? The colour cast of the lens
How do I clean the lens properly?
Use a soft, lint-free cloth – slightly dampened with mild glass cleaner for heavier soiling. Avoid abrasives and aggressive cleaners, as they can scratch the surface.
Read more in our guide: How do I clean the lens?
The lens reflects – is that normal and what helps?
Reflections on the lens are physically normal, especially with glossy objects and bright light sources behind you. Usually it already helps to swivel the lamp head slightly or change the angle between light, object and viewing direction – on dimmable models, also reduce the brightness a little.
Read more in our guide: Reflections on the lens: what is normal and what helps
Can the lens fall out?
Not in normal use - the lens sits in a frame that clicks in all the way round. When changing it, make sure the frame closes audibly, and lay the lamp down flat rather than working on it at the gooseneck. If the lamp is set up and taken down often, check the seating from time to time: a loose frame is the most common reason for a cracked lens.
Read more in our guide: Changing the lens: when it works and when it is better not to
